I. Saitin kayan aikin asali na tashar haɗa-hadar HZS120
1. Tsarin Mixer
– Samfuri: JS2000 mai sanduna biyu na tilastawa Na'urar haɗawa
– Ma'aunin Fasaha:
– Karfin Wuta da aka Kayyade: 2 × 37 kW
– Ƙarfin haɗawa: Lita 2000 a kowane haɗi
– Lokacin zagaye na ka'ida: daƙiƙa 60
– Tsayin zubewa: mita 4.2
– Fasalolin Ayyuka:
– Maballan ƙarfe na haɗin chromium mai yawa masu tauri HRC58–62
– Rayuwar aikin layi: zagaye 80,000–100,000
2. Tsarin Haɗa Gauraye
– Saitin Ka'ida: PLD3200 mai hopper huɗu Haɗawa a lokaci guda na'ura
– Zangon aunawa: 0–4000 kg
– Daidaiton aunawa: ±2%
– Jimillar ƙarfin ajiya: 4 × 20 m³
– Zaɓuɓɓukan haɓakawa:
– Na'urar haɗawa mai nauyin kowane kwano biyar (don ƙarin nau'in haɗe-haɗe guda ɗaya)
– Ayyukan dumama na hunturu (aiki na al'ada a -20°C)
3. Tsarin Ajiya na Foda
– Saitin Asali:
– Silos na siminti: 4 × 100 t (diamita Φ3 m)
– Na'urorin ɗaukar kaya na dunƙule: Φ273/219 mm
– Saitin da ake ba da shawara don tashoshin kasuwanci:
– Silosi huɗu na foda (don ajiye matakai daban-daban a daban)
– Na'urorin hana lankwasawa
– Tsarin cire ƙura ta bugun iska (ƙimar ƙura <20 mg/m³)
4. Tsarin Jigilar Tarin
– Saitin Ka'ida:
– Fadin bel ɗin mai ɗaukar kaya 800–1000 mm
– Gango mai mota na 37 kW
– Na'urar tsaftace bel
– Na'urar daidaita ƙarfafan bel
II. Jagoran Fasaha don Zaɓin Kayan Aiki
Muhimman abubuwan la'akari wajen zaɓin injin haɗe-haɗe
– Ayyuka na ɗan lokaci: Na'urar haɗawa JS2000 da aka ƙera a cikin gida (farashi ƙasa)
– Tashoshin Siminti na Kasuwanci: An ba da shawarar injin haɗa SICOMA MAO2000/3000 (ƙarancin gazawa, ɗorewa mai ƙarfi)
– Ayyuka na Musamman: Yana buƙatar na'urorin haɗawa masu dacewa da manyan diamita na tarin abubuwa
1. Zaɓin Tsarin Haɗawa
| Nau'in Saitawa | Halin da ya dace | Tsarin Farashi (10,000 RMB) |
| Na'urar Auna Kai Tsaye ta Hopper Huɗu | Ayyukan Injiniya | 13-15 |
| Nau'in Hopper Mai Cin Gaba | Tashoshin kasuwanci | 17-19 |
| Nauyin tarawa na Hopper huɗu | Gabaɗayan Ayyuka | 9-10 |
3. Shawarwarin Saitin Tsarin Foda
– Adadin silos na siminti:
– Ayyuka na Asali: silo 3 (siminti PO32.5 + toka mai tashi + foda ma'adinai)
– Tashoshin Kasuwanci: silo huɗu (simentin PO32.5 + PO42.5 + toka mai tashi + foda ma'adinai)
– Zaɓi na Al'ada: Φ273 mm (siminti) + Φ219 mm (tushar toka, foda ma'adinai)
4. Shawarwarin Tsarin Jigilar Kaya
– Tashoshin Kasuwanci: bel mai faɗin 1000 mm (rayuwar sabis mai tsawo, babu zubar kayan aiki)
– Ayyukan Injiniya: Mashi mai ɗaukar kaya mai faɗin 800 mm (ƙaramin farashi)
III. Tsarin Kayan Aiki da Bukatun Sanya
1. Tsare-tsaren Tsarin Asali
– Tsarin madaidaici:
– Fadin fili: 55 m × 20 m
– Fasali: Tsarin sufuri mai santsi, kulawa mai sauƙi
– Tsarin L:
– Fadin fili: 48 m × 35 m
– Fasali: Ajiye sarari, ya dace da wurare masu iyaka
2. Muhimman Ma'aunin Saitawa
– Ƙarfin ɗaukar nauyi na tushe: ≥150 kPa
– Daidaiton sashi da aka saka: Madaidaici ≤3 mm/m
– Saitin wuta:
– Jimillar Karfi: ~230 kW
– Raguwar Volti: ±5%
IV. Jagororin Kula da Kayan Aiki
1. Jerin duba na kulawa na yau da kullum
– Mai haɗa:
– Duba tazara tsakanin reza (3–5 mm)
– Yi tsabta bayan kowace sauyin aiki
– Tsarin Rarrabawa:
– Duba hatimin silinda (kowane mako)
– Tsarin Foda:
– Duba ko akwai toshewa
– Duba na'urorin hana lankwasawa
2. Zangon Sauya Sassa Masu Lalacewa
| Sunan sashi | Tsawon rayuwar hidima | Kudin maye gurbin (RMB) |
| Blades na Mixer | 60,000–80,000 zagaye | 5000/saiti |
| Layuka | 80,000–100,000 zagaye | 12000/saiti |
| Konveyo mai dunƙule | shekaru 3-5 | 9000 ga kowace guda |
Don cikakken takardun fasaha ko mafita na musamman don HZS120 Masana'antar haɗawa, da fatan za a tuntuɓi ƙungiyar injiniyarmu. Muna ba da tallafin fasaha na ƙwararru da tabbacin sabis.
