WBZ600

The WBZ600 stabilized soil mixing plant is rated at 600 t/h or above. Four aggregate compartments of 12 m³ each feed a continuous twin-shaft mixer, and finished material storage holds 8 m³ before the discharge belt takes the mix to the truck, and the belt can swap sides when the yard layout changes.
Total installed power is 163 kW and maximum aggregate size 60 mm. Cement metering, water addition and mixing run as one line under centralised control, which keeps gradation and binder content inside the mix design through a shift that may run past ten hours, because binder dosing follows belt weight rather than a fixed timer.
Highway, railway and municipal base work with high daily tonnage suits this model. Four compartments let the crew keep two aggregate grades plus sand and filler available without stopping to re-stock, so the paving front never waits for a loader cycle, provided stockpile volume covers two shifts.
Check the supply against 163 kW on the WBZ600 stabilized soil mixing plant, plan the stockpile so a loader reaches every compartment, and confirm the foundation with the supplied drawings. Settle dust collection and noise treatment with local requirements before commissioning, and keep the parameter sheet on site for the first inspection.