WBZ500 Stabilized Soil Mixing Plant

The TXMixing WBZ500 stabilized soil mixing plant delivers a rated production capacity of 500 tons per hour for road construction and infrastructure projects. It features a twin-shaft continuous linerless mixer, an aggregate batching system and PLC/computer-based control. Designed to process cement, lime, soil, sand, gravel and fly ash, the plant supports continuous production of cement-stabilized soil, lime-stabilized soil and graded aggregate base materials.

How the WBZ500 Is Built

WBZ500 Stabilized Soil Mixing Plant for Large-Scale Road Construction

The TXMixing WBZ500 stabilized soil mixing plant is designed for continuous production of stabilized materials used in highway, railway and other large infrastructure projects. It combines aggregate batching, powder metering, water supply and twin-shaft continuous mixing into a coordinated production system.

For contractors handling large road construction projects, maintaining a consistent supply of road base materials is an important part of construction planning. The WBZ500 brings the main material feeding and mixing operations together, helping coordinate production with the requirements of downstream construction work.

Its automated control system also supports production management, allowing operators to manage different material formulations and monitor equipment operation through a centralised control arrangement.

Key Features of the WBZ500 Stabilized Soil Mixing Plant

Twin-Shaft Continuous Mixing System

The WBZ500 adopts a horizontal twin-shaft continuous mixing structure without conventional liner plates. Its mixing blades move materials throughout the mixing chamber, helping combine soil, aggregates, binders and water into a consistent mixture.

The linerless arrangement reduces the need to manage conventional chamber liners, while the mixing blades remain accessible for inspection and replacement as part of routine maintenance.

Accurate Material Metering and Batching

Consistent material proportions are essential when producing cement-stabilized crushed stone, lime-stabilized soil and other road base mixtures.

The WBZ500 incorporates material metering and feeding arrangements for aggregates, powder materials and water. Sensing and flow-control components coordinate the supply of different ingredients according to the selected mix formulation.

For projects involving multiple material recipes, the metering configuration should be matched to the approved engineering specifications and the characteristics of the raw materials.

Automated Production Control

The PLC or computer-based control system coordinates the main production operations. According to the published configuration, it supports automated start and stop, production recipe management, fault diagnosis and production data traceability.

This arrangement gives operators a centralised way to manage material proportions, monitor equipment status and review production information.

For buyers comparing automation options, confirm the specific software functions, data storage arrangements and reporting capabilities included in the final quotation.

Flexible Raw Material Compatibility

The WBZ500 is designed to process different materials used in stabilized soil production, including:

  • Cement: For cement-stabilized soil and crushed stone mixtures.
  • Quicklime and hydrated lime: For lime-stabilized soil formulations.
  • Soil and sand: As base materials in suitable stabilized mixtures.
  • Gravel and crushed stone: For graded road base and subbase materials.
  • Fly ash: For suitable binder-based stabilized material formulations.

The final combination and proportions depend on the project’s approved mix design.

Practical Maintenance and Component Replacement

Continuous mixing equipment requires regular inspection of its working components. The WBZ500 uses wear-resistant alloy mixing blades designed for abrasive material handling.

The modular arrangement of key components supports inspection and maintenance. Buyers should also review access to bearings, drive components, powder feeding equipment and other parts requiring routine servicing.

Applications of the WBZ500 Road Base Mixing Plant

The WBZ500 is intended for infrastructure projects that require a continuous supply of stabilized construction materials.

  • Highway construction: Producing stabilized materials for highway base and subbase layers.
  • Railway subgrade construction: Supplying suitable stabilized mixtures for railway foundation and supporting works.
  • Urban road development: Supporting municipal road construction, expansion and reconstruction.
  • Airport infrastructure: Producing specified stabilized materials for pavement foundation applications.
  • Large infrastructure projects: Providing a coordinated mixing solution for projects with substantial material supply requirements.

For every application, the material formulation should follow the relevant engineering specifications and quality requirements.

How the WBZ500 Production System Works

The WBZ500 coordinates several material handling and mixing stages to produce stabilized base materials.

1. Aggregate Feeding

Different aggregate grades are stored separately and supplied to the batching system. The feeding arrangement should reflect the required grading and material proportions of the project.

2. Powder Supply and Metering

Cement, lime and other powder binders are supplied through the powder storage and conveying system. Metering equipment controls the amount of binder entering the production process.

For supporting powder handling equipment, explore the cement silo range and LSY screw conveyor.

3. Water Addition

Water is supplied and controlled according to the selected mix formulation. Moisture content is an important consideration in stabilized soil production, as it affects the handling and compaction characteristics of the finished material.

4. Continuous Mixing

Aggregates, binders and water enter the twin-shaft mixing system, where the materials are continuously combined before discharge.

5. Finished Material Discharge

The finished mixture is transferred to the receiving and loading area for collection and transportation to the construction site.

The feeding rate, mixing process and truck collection schedule should be coordinated to avoid unnecessary production interruptions.

Planning a WBZ500 Installation

A high-capacity stabilized soil mixing plant requires careful planning beyond the equipment footprint. Raw material storage, vehicle circulation and finished-material transportation all influence how effectively the plant can support construction operations.

Raw Material Storage

Plan separate storage areas for aggregate grades and powder binders. Consider the frequency of material replenishment, loader access and the distance between storage areas and feeding equipment.

Powder Handling and Dust Collection

Cement and fly ash handling should be considered together with silo connections, screw conveyors and dust collection equipment. Confirm the required environmental provisions and dust-control configuration before installation.

Foundation and Equipment Layout

The installation site should provide suitable ground conditions and foundations for the selected equipment arrangement. Particular attention should be given to the mixer, aggregate batching system and powder storage structures.

Request the equipment layout and foundation drawings before preparing the site. The final foundation requirements should be based on the approved equipment configuration and local ground conditions.

Truck Access and Material Delivery

Finished stabilized materials need to be collected and transported in coordination with the construction schedule. Allow sufficient room for truck access, loading and vehicle turnaround.

When calculating actual production demand, consider transport distance and truck availability rather than relying only on the equipment’s rated output.

How to Select the Right WBZ Stabilized Soil Mixing Plant

When comparing WBZ models, consider the actual material demand and construction conditions of your project.

Production Requirements

Estimate the amount of stabilized material required each day and the operating hours available. Consider whether the downstream paving operation and transport fleet can consume the planned production volume.

Material Formulation

Identify the aggregate grading, soil characteristics and binder proportions required by the project. Different formulations may require different batching and metering arrangements.

Metering and Control Requirements

Confirm the required weighing accuracy, feeding method, recipe management functions and production monitoring capabilities. Make sure the selected configuration supports the approved mix design.

Installation Conditions

Provide the available site dimensions, ground conditions, utility supply and material storage arrangements. These details help determine the overall plant layout and supporting equipment.

Maintenance and Spare Parts

Ask about mixing blade replacement, bearing inspection, drive system maintenance and the availability of commonly used spare parts. Clarify the maintenance support included in the equipment proposal.

WBZ500 Configuration and Project Reference

For buyers who want to understand the equipment arrangement in more detail, TXMixing has published a technical overview of the WBZ500’s core configuration.

The article discusses the aggregate supply system, conveying arrangement and twin-shaft mixing equipment, providing additional context for evaluating the production line.

Read the WBZ500 Stabilized Soil Mixing Plant Core Configuration Analysis.

Compare Other WBZ Stabilized Soil Mixing Plant Models

TXMixing offers different WBZ configurations for road construction projects with varying production requirements.

Explore the complete stabilized soil mixing plant range to compare available solutions.

Frequently Asked Questions

What is the WBZ500 stabilized soil mixing plant used for?

It is designed for continuous production of stabilized materials used in highways, railways, urban roads and other infrastructure projects.

What materials can the WBZ500 process?

The plant can process soil, sand, gravel and other aggregates together with cement, quicklime, hydrated lime and fly ash, subject to the selected configuration and approved mix design.

Is the WBZ500 a continuous or batch mixing plant?

The WBZ500 uses a twin-shaft continuous mixing system. Materials are fed and combined as part of an ongoing production process rather than being prepared as separate batches.

Does the WBZ500 support automatic operation?

Yes. Its PLC or computer-based control system supports automated production operation, recipe management, fault diagnosis and production data traceability according to the published product configuration.

How do I maintain the WBZ500 mixing system?

Routine maintenance should include inspection of mixing blades, drive components, bearings, feeding equipment and lubrication arrangements. Follow the manufacturer’s maintenance schedule for the selected configuration.

What information is needed for a WBZ500 quotation?

Prepare your project location, required production output, raw material types, approved mix design, installation site dimensions and supporting equipment requirements. This information helps the manufacturer review the appropriate configuration.

WBZ500 Technical Specifications

Technical Parameter Specification Remarks
Model WBZ500
Rated Production Rate 500 tons/hour Core parameter
Concrete Mixer Twin-Shaft Continuous Mixer Linerless design
Mixer Shaft Speed Approximately 63.2 rpm
Total Installed Power 150 kW Depending on configuration
Number of Aggregate Silos 3–4 Depending on raw materials
Powder Silo Capacity 1 × 100 tons
Maximum Aggregate Size ≤60 mm Customisable
Discharge Height 3.8 m
Powder Metering Accuracy ±2% As stated in product FAQ
Control Method PLC / Computer Control Automatic / Manual

News and Field Notes on the WBZ500

Is the WBZ500 Right for Your Project?

Tell us what you need to produce, your target output and where the plant will operate. Our team can help you explore equipment configurations, layout options and pricing.

Built Around Your Project

Equipment and plant layouts tailored to your materials, output requirements and available space.

Precision Manufacturing

Laser cutting and robotic welding support component accuracy and consistent fabrication quality.

Proven Project Applications

Equipment supplied for railway tunnels, mountain expressways and overseas infrastructure projects.

Support Beyond Delivery

Installation, commissioning and maintenance support to help you set up and operate your plant.

Discuss Your Plant Requirements

Whether you have a model in mind or are still comparing options, share a few project details to start the conversation.

Not sure which model to choose? Describe your application, and we can discuss the options with you.

Do You Have Any Questions!

Global Projects in 2024
100 +
Customers in China and Abroad
500 +
Workshop Management
5 S
Year Established
0
Send us an inquiry

If you’re looking for a concrete batching plant, stabilized soil batching plant, or other construction machinery and equipment, please contact us and we’ll respond within 24 hours.