HZS180 Concrete Batching Plant
The Tongxin Machinery HZS180 concrete batching plant is designed for large-scale concrete production, with a theoretical output of 180 m³/h. It features an MAO4000/3000 mixer specification, a PLD4800 four-bin aggregate batching system and independent weighing systems for cement, fly ash, water and aggregates. With a 4.1 m discharge height, automated production control and configurable powder storage, the HZS180 provides an integrated concrete production solution for commercial batching plants and major infrastructure projects.
How the HZS180 Is Built
HZS180 Concrete Batching Plant for High-Volume Production
The Tongxin Machinery HZS180 concrete batching plant is designed for large-scale concrete production, with a theoretical production rate of 180 m³/h. It combines a forced mixing system, PLD4800 four-bin aggregate batching machine, independent material weighing systems and automated production control.
With four aggregate storage bins, each specified at 20 m³ in the main technical parameter table, the plant can handle different aggregate grades for concrete production. Separate weighing systems manage cement, fly ash, water and aggregates according to the selected mix proportions.
The HZS180 is suitable for commercial concrete production and large infrastructure projects where production capacity, material batching accuracy and coordinated equipment operation are important.
Key Features of the HZS180 Concrete Batching Plant
180 m³/h Theoretical Production Capacity
The HZS180 has a theoretical production rate of 180 cubic metres per hour. Its production configuration is intended for projects with substantial concrete supply requirements, including commercial batching operations and large construction sites.
Actual output depends on the concrete mix, raw material supply, mixing cycle, transportation arrangements and site operating conditions.
MAO4000/3000 Mixer Specification
The main technical parameter sheet lists an MAO4000/3000 mixer with a mixing power of 2 × 55 kW. The specified discharge height is 4.1 metres, providing the required arrangement for concrete collection and transportation.
PLD4800 Four-Bin Aggregate Batching System
The HZS180 uses a PLD4800 aggregate batching machine with four independently arranged aggregate bins. Each bin is specified at 20 m³ in the main technical parameter table.
The semi-underground batching arrangement is designed to allow direct loader access without requiring a conventional loading ramp. The technical specification also describes independent weighing for each material, pneumatic discharge gates and vibration devices to help reduce material adhesion.
Independent Material Weighing Systems
The plant has separate weighing arrangements for aggregates, cement, fly ash and water. The main technical parameters specify the following weighing ranges and accuracy requirements:
- Cement: 300–1,800 kg, ±1% accuracy.
- Fly ash: 200–1,800 kg, ±1% accuracy.
- Water: 200–800 kg, ±1% accuracy.
- Aggregates: 600–3,000 kg, ±2% accuracy.
Independent material weighing allows different raw materials to be measured separately before entering the mixing process.
Automated Production Monitoring
The HZS180 uses an industrial computer-based control system with input/output cards. It supports production parameter backup, automatic production data recording and report generation.
The listed monitoring arrangement also includes cameras at the inclined belt conveyor, mixer discharge area and aggregate batching machine, helping operators monitor key production points.
HZS180 Main Equipment Configuration
The supplied HZS180 configuration document identifies the following major equipment groups:
| Main Equipment | Listed Configuration |
|---|---|
| Mixing System | JS3000 mixer listed in the equipment configuration |
| Aggregate Batching | PLD4800 four-bin batching machine |
| Aggregate Conveying | 1,000 mm belt conveyor |
| Waiting Hopper | Waiting hopper with wear-resistant lining |
| Water Weighing | Independent water weighing system |
| Admixture Weighing | Stainless steel admixture metering tank |
| Powder Weighing | Independent cement and fly ash weighing systems |
| Screw Conveyors | 325 mm and 273 mm specifications |
| Control System | Automatic centralised control and monitoring |
| Dust Collection | Electric dust collector for the main mixer |
The final equipment supply arrangement, including cement silos, enclosure and auxiliary systems, should be checked against the approved quotation.
Production Management for Large Infrastructure Projects
For high-volume concrete production, equipment selection is only one part of the planning process. Raw material delivery, powder storage, batching accuracy and concrete transportation all affect the continuity of supply.
The HZS180 control system supports production data recording and reporting. According to the supplied technical specification, production records can include:
- Operator name and production batch number.
- Truck identification and receiving contractor.
- Production date and mixing time.
- Concrete type and quantity.
- Concrete placement location.
These records can be used for production statistics, querying and printing. The output format is also specified as editable according to project requirements.
Related Project Reference: Dual HZS120 Solution for a Mountain Expressway
Large infrastructure projects often require more than a high-capacity mixing unit. The overall plant arrangement must also account for material transportation, site access and production continuity.
In Tongxin Machinery’s mountain expressway project, two HZS120 concrete batching plants were deployed as a dual-line production solution. The project involved rugged mountain terrain and access roads that became difficult to use during rainy seasons.
To address the material supply challenges, the solution included five separate powder silos: three for cement, one for fly ash and one for slag powder. Each production line had independent weighing, conveying and mixing systems.
The two lines could operate simultaneously to increase output or serve as backups for each other during maintenance or unexpected equipment interruptions.
This is a separate HZS120 project rather than an HZS180 installation. It provides a practical reference for planning powder storage, production-line arrangements and operational continuity on large highway projects.
Applications of the HZS180 Concrete Batching Plant
The HZS180 is designed for concrete production operations requiring a substantial and coordinated supply of ready-mixed concrete.
- Commercial concrete production: For batching plants supplying concrete to multiple construction sites.
- Highway construction: For concrete supply to road structures, bridges and associated infrastructure.
- Railway projects: For projects requiring coordinated material batching and production records.
- Bridge and tunnel construction: For large construction programmes with demanding concrete supply schedules.
- Water conservancy projects: For concrete production supporting major civil engineering works.
The final plant configuration should be selected according to the required concrete grades, material consumption, site conditions and transportation arrangements.
Site Layout and Installation Considerations
Before installing an HZS180 concrete batching plant, buyers should assess the available land, foundation conditions, material storage areas and truck circulation routes.
The supplied technical specification identifies a main tower dimension of approximately 5 × 6 metres and a receiving-floor clear height of more than 4.2 metres to accommodate concrete mixer trucks with a loading capacity of over 10 m³.
Other planning considerations include:
- Aggregate loading: The batching station is specified with a 3.5 m bin width for direct loading by a ZL50 wheel loader.
- Powder storage: Confirm the required cement, fly ash and mineral powder silo capacities.
- Conveying access: Allow space for inclined belt conveyors, waiting hoppers and maintenance walkways.
- Water supply: Check the site water supply and pumping requirements.
- Electrical supply: Confirm the power supply according to the final installed equipment configuration.
- Vehicle access: Plan sufficient space for aggregate delivery, concrete truck loading and vehicle circulation.
Request the final layout and foundation drawings before preparing the installation site.
How to Select the Right HZS180 Configuration
When comparing HZS180 concrete batching plant proposals, focus on the complete production system rather than theoretical capacity alone.
1. Confirm Your Concrete Production Requirements
Identify the concrete grades, required output and expected operating hours. This helps establish whether the theoretical 180 m³/h capacity is appropriate for your production schedule.
2. Review the Aggregate Batching Arrangement
Confirm the number of aggregate types, bin capacity and weighing ranges. The four-bin PLD4800 arrangement should be matched to the project’s actual aggregate mix.
3. Check Powder Storage and Feeding
Estimate cement, fly ash and mineral powder consumption. Confirm the number and capacity of silos, screw conveyor sizes and replenishment arrangements.
4. Check the Weighing and Control Systems
Review the weighing ranges and accuracy requirements for each material. Also confirm the control software, production records, monitoring equipment and report format.
5. Confirm the Complete Quotation
Ask the supplier to distinguish standard equipment from optional items, including silos, external enclosure, auxiliary equipment and installation-related requirements.
Related Equipment for Your Concrete Batching Plant
Powder storage and conveying equipment are important parts of an HZS180 production system.
Explore the Tongxin Machinery cement silo range for bulk cement and fly ash storage, or review the cement screw conveyor range for powder transfer between silos and weighing systems.
You can also compare other models in the concrete batching plant range to evaluate different production capacities and equipment arrangements.
Frequently Asked Questions
What is the theoretical production capacity of the HZS180?
The HZS180 has a theoretical production rate of 180 m³/h. Actual output depends on the concrete mix, material supply, mixing cycle and site operating conditions.
Which mixer is used in the HZS180?
The main technical parameter sheet specifies an MAO4000/3000 mixer. The detailed equipment configuration separately lists a JS3000 mixer. This model discrepancy should be confirmed in the final equipment quotation.
How many aggregate bins does the HZS180 have?
The plant uses a PLD4800 four-bin aggregate batching machine. The main technical parameter table lists four bins with a capacity of 20 m³ each.
What is the discharge height?
The specified discharge height is 4.1 metres.
What is the maximum aggregate size?
The main technical parameter sheet specifies a maximum aggregate size of 80 mm.
Does the HZS180 support separate powder weighing?
Yes. The technical specification describes independent weighing systems for cement and fly ash or mineral powder, with separate weighing ranges and accuracy requirements.
Does the HZS180 have an automatic control system?
Yes. It uses an industrial computer-based control system with production parameter backup, data recording, report generation and monitoring functions.
Can the HZS180 configuration be customised?
The main equipment arrangement can be reviewed according to project requirements, including aggregate storage, powder silos, conveying systems, control equipment and auxiliary components. Confirm the final supply scope with the supplier.
The detail behind this unit is collected in three companion articles: HZS180 price and purchasing guide, HZS180 power requirements and transformer configuration and HZS120 versus HZS180 comparison. Each records how the plant was set up, measured and maintained on real jobs, with the figures our engineers check before quoting.
HZS180 Technical Specifications
width: 100%;
overflow-x: auto;
margin: 20px 0;
}
.tx-hzs180-specs table {
width: 100%;
min-width: 560px;
border-collapse: collapse;
border-top: 3px solid #268B9B;
font-size: 14px;
}
.tx-hzs180-specs th {
background: #183653;
color: #fff;
padding: 13px 15px;
text-align: left;
font-weight: 600;
}
.tx-hzs180-specs td {
padding: 12px 15px;
border: 1px solid #DFE7EF;
color: #35465A;
}
.tx-hzs180-specs tbody tr:nth-child(odd) {
background: #F1F6FA;
}
.tx-hzs180-specs tbody tr:nth-child(even) {
background: #fff;
}
.tx-hzs180-specs tbody td:nth-child(odd) {
font-weight: 600;
color: #183653;
width: 27%;
}
| Main Technical Parameters – HZS180 | |||
|---|---|---|---|
| Model | HZS180 | Theoretical Production Rate | 180 m³/h |
| Mixer Model | MAO4000/3000 | Discharge Height | 4.1 m |
| Mixing Power | 2 × 55 kW | Maximum Aggregate Size | 80 mm |
| Aggregate Batcher Model | PLD4800 | Aggregate Bin Capacity | 4 × 20 m³ |
| Maximum Cement Weighing Range | 300–1,800 kg | Maximum Water Weighing Range | 200–800 kg |
| Cement Weighing Accuracy | ±1% | Water Weighing Accuracy | ±1% |
| Maximum Fly Ash Weighing Range | 200–1,800 kg | Maximum Aggregate Weighing Range | 600–3,000 kg |
| Fly Ash Weighing Accuracy | ±1% | Aggregate Weighing Accuracy | ±2% |
News and Field Notes on the HZS180
Is the HZS180 Right for Your Project?
Tell us what you need to produce, your target output and where the plant will operate. Our team can help you explore equipment configurations, layout options and pricing.
Built Around Your Project
Equipment and plant layouts tailored to your materials, output requirements and available space.
Precision Manufacturing
Laser cutting and robotic welding support component accuracy and consistent fabrication quality.
Proven Project Applications
Equipment supplied for railway tunnels, mountain expressways and overseas infrastructure projects.
Support Beyond Delivery
Installation, commissioning and maintenance support to help you set up and operate your plant.
Discuss Your Plant Requirements
Whether you have a model in mind or are still comparing options, share a few project details to start the conversation.
Not sure which model to choose? Describe your application, and we can discuss the options with you.
Do You Have Any Questions!
- +86 135 9266 6878
- info@txmixing.com
- Room 401, Building 9, No. 1187 Kexue Avenue, Shangjie District, Zhengzhou, Henan 450041, China

![9140565e098780e[1]](https://txmixing.com/wp-content/uploads/2026/02/9140565e098780e1.jpg)
![d213b8e1e18b555[1]](https://txmixing.com/wp-content/uploads/2026/02/d213b8e1e18b5551-1.jpg)
![453718c497c15[3]](https://txmixing.com/wp-content/uploads/2026/02/453718c497c153.jpg)
![0ac4971af928612[1]](https://txmixing.com/wp-content/uploads/2026/02/0ac4971af9286121.jpg)


